One Drive Engines
MV8 6.0L
DESCRIPTIONS:
The robust and reliable MV8-6.0L features variable valve timing for a well-rounded ride, maximizing low-end torque and delivering high RPM horsepower.
Specifications:
The robust and reliable MV8-6.0L features variable valve timing for a well-rounded ride, maximizing low-end torque and delivering high RPM horsepower.
- Lightweight General Motors Block
- Easy Access Service Points, Including Oil Filter Courtesy Tray
- Performance-Tuned Aluminum Intake
- Electronic Throttle Standard
- Closed-Cooled Standard, Including Exhaust Manifolds
- Close-Fitting Heat Exchanger With Integrated Overfill Tank
- Molded Hoses And Out-Of-Sight Wiring
- 75-Hour Oil Service Interval*
- Hard-Anodized Exhaust System
- 5 Year/500 Hour Factory-Backed Limited Warranty**
Specifications:
- Displacement: 5.98L
- Power Rating: 283 kW @ 5200 RPM (380 HP)
- Peak Torque: 401 ft-lbs @ 4400 RPM
MV8 6.2L
DESCRIPTIONS:
The lightweight and powerful General Motors 6.2L offers added muscle for sporty responsiveness and extra performance.
Specifications:
The lightweight and powerful General Motors 6.2L offers added muscle for sporty responsiveness and extra performance.
- Easy Access Service Points, Including Oil Filter Courtesy Tray
- Performance-Tuned Aluminum Intake
- Electronic Throttle Standard
- Closed-Cooled Standard, Including Exhaust Manifolds
- Close-Fitting Heat Exchanger With Integrated Overfill Tank
- Molded Hoses And Out-Of-Sight Wiring
- 75-Hour Oil Service Interval*
- Hard-Anodized Exhaust System
- 5 Year/500 Hour Factory-Backed Limited Warranty**
Specifications:
- Displacement: 6.16L
- Power Rating: 321 kW @ 5400 RPM (430 HP)
- Peak Torque: 437 ft-lbs @ 4600 RPM
MV8 7.4L
DESCRIPTIONS:
Proven to withstand both extreme torque and speed/power conditions, the MV8 7.4L is a nicely balanced recreational sterndrive engine that fills the power void currently experienced in the gasoline sterndrive segment between recreational duty 430 HP and high performance 520 HP+.
Uniquely positioned at 483 HP, the MV8 7.4L meets a long-awaited need for manufacturers as well as boating enthusiasts, providing substantial power and torque for sportier cruisers and bowriders without sacrificing Ilmor's renowned durability that owners have come to depend upon for trouble-free boating.
The MV8 7.4L engine is hand-built in Ilmor's Plymouth, Michigan racing headquarters, with Ilmor-designed internal components, including forged crank, rods and pistons. The engine comes standard with closed cooling and electric throttle, and features a performance tuned cast aluminum intake and easily accessible service points.
Specifications:
Proven to withstand both extreme torque and speed/power conditions, the MV8 7.4L is a nicely balanced recreational sterndrive engine that fills the power void currently experienced in the gasoline sterndrive segment between recreational duty 430 HP and high performance 520 HP+.
Uniquely positioned at 483 HP, the MV8 7.4L meets a long-awaited need for manufacturers as well as boating enthusiasts, providing substantial power and torque for sportier cruisers and bowriders without sacrificing Ilmor's renowned durability that owners have come to depend upon for trouble-free boating.
The MV8 7.4L engine is hand-built in Ilmor's Plymouth, Michigan racing headquarters, with Ilmor-designed internal components, including forged crank, rods and pistons. The engine comes standard with closed cooling and electric throttle, and features a performance tuned cast aluminum intake and easily accessible service points.
- Easy Access Service Points, Including Oil Filter Courtesy Tray
- Performance-Tuned Aluminum Intake
- Electronic Throttle Standard
- Closed-Cooled Standard, Including Exhaust Manifolds
- Close-Fitting Heat Exchanger With Integrated Overfill Tank
- Molded Hoses And Out-Of-Sight Wiring
- 75-Hour Oil Service Interval*
- Hard-Anodized Exhaust System
- 5 Year/500 Hour Factory-Backed Limited Warranty**
Specifications:
- Displacement: 7.44L
- Power Rating: 360 kW @ 5400 RPM (483 HP)
- Peak Torque: 516 ft-lbs @ 4400 RPM
MasterCraft Boat Engines MY17+ Engines
5000MPI
DESCRIPTIONS:
Ilmor's MPI engine class sets a new standard for recreational marine performance. Powerful, reliable and efficient, the MPI engine class is designed to keep your mind off troubleshooting and focused on enjoying your day on the water. A power-dense performer that's durable and cost-efficient, our 5000MPI model has more than 60 years of legendary small-block heritage.
Specifications:
Ilmor's MPI engine class sets a new standard for recreational marine performance. Powerful, reliable and efficient, the MPI engine class is designed to keep your mind off troubleshooting and focused on enjoying your day on the water. A power-dense performer that's durable and cost-efficient, our 5000MPI model has more than 60 years of legendary small-block heritage.
Specifications:
- Displacement: 5.7L
- Power Rating: 239 kW @ 5000 RPM (320 HP)
- Torque: 495 NM @ 4200 RPM (365 ft-lb)
5500GDI
DESCRIPTIONS:
Incorporating the latest advances in automotive powertrain engineering and years of experience perfecting the direct fuel injection delivery system, Ilmor's all new GDI class marine engines deliver a whole new level of efficiency without sacrificing power. The only gasoline marine engine with a five star emissions rating, the GDI platform offers unparalleled fuel efficiency and a noticeably smoother, cleaner, quieter, safer and more responsive ride.
Specifications:
Incorporating the latest advances in automotive powertrain engineering and years of experience perfecting the direct fuel injection delivery system, Ilmor's all new GDI class marine engines deliver a whole new level of efficiency without sacrificing power. The only gasoline marine engine with a five star emissions rating, the GDI platform offers unparalleled fuel efficiency and a noticeably smoother, cleaner, quieter, safer and more responsive ride.
Specifications:
- Displacement: 5.3L (Gen V)
- Power Rating: 272 kW @ 5400 RPM (365 HP)
- Torque: 543 NM @ 4100 RPM (400 ft-lb)
6000GDI
DESCRIPTIONS:
Incorporating the latest advances in automotive powertrain engineering and years of experience perfecting the direct fuel injection delivery system, Ilmor's all new GDI class marine engines deliver a whole new level of efficiency without sacrificing power. The only gasoline marine engine with a five star emissions rating, the GDI platform offers unparalleled fuel efficiency and a noticeably smoother, cleaner, quieter, safer and more responsive ride.
Specifications:
Incorporating the latest advances in automotive powertrain engineering and years of experience perfecting the direct fuel injection delivery system, Ilmor's all new GDI class marine engines deliver a whole new level of efficiency without sacrificing power. The only gasoline marine engine with a five star emissions rating, the GDI platform offers unparalleled fuel efficiency and a noticeably smoother, cleaner, quieter, safer and more responsive ride.
Specifications:
- Displacement: 6.2L (Gen V)
- Power Rating: 321 kW @ 5400 RPM (430 HP)
- Torque: 650 NM @ 4000 RPM (479 ft-lb)
7000MPI
DESCRIPTIONS:
Ilmor's MPI engine class sets a new standard for recreational marine performance. Powerful, reliable and efficient, the MPI engine class is designed to keep your mind off troubleshooting and focused on enjoying your day on the water.
At 522hp (390kW), the 7000MPI is the most powerful catalyzed production marine engine available today.Our 7000MPI engine features sophisticated variable valve timing, forged Ilmor-developed internal components, and is hand built to the same quality standards as our race-winning IndyCar engines.
The 87-octane compatible, naturally aspirated engine architecture provides more horsepower, better fuel economy, and longer parts durability than comparable supercharged engines.The 7000MPI conforms to EPA, CARB and EU emissions standards, producing nearly 70% lower Carbon Monoxide emissions than other gasoline engines of comparable horsepower – a benefit for wake surfers and boarders riding its massive wakes.
Ilmor's MPI engine class sets a new standard for recreational marine performance. Powerful, reliable and efficient, the MPI engine class is designed to keep your mind off troubleshooting and focused on enjoying your day on the water.
At 522hp (390kW), the 7000MPI is the most powerful catalyzed production marine engine available today.Our 7000MPI engine features sophisticated variable valve timing, forged Ilmor-developed internal components, and is hand built to the same quality standards as our race-winning IndyCar engines.
The 87-octane compatible, naturally aspirated engine architecture provides more horsepower, better fuel economy, and longer parts durability than comparable supercharged engines.The 7000MPI conforms to EPA, CARB and EU emissions standards, producing nearly 70% lower Carbon Monoxide emissions than other gasoline engines of comparable horsepower – a benefit for wake surfers and boarders riding its massive wakes.
Inboard Engines (incl. Mastercraft MY16 and Earlier) Engines
MV8 5.7L and 5.7L OPS
DESCRIPTIONS:
The MV8 5.7L sets a new standard for recreational marine performance. Durable, reliable and efficient, the 5.7L is designed to keep your mind off troubleshooting and focused on enjoying your day on the water. The 5.7L has also been certified for tournament use by the American Water Ski Association.
The Ilmor MV8 Ocean Performance Series (OPS) engines are designed for salt-water use or other closed cooled applications. Available in all three displacement variants, OPS engines provide superior temperature control compared to an open cooled system and enhance catalyst performance through temperature control. The OPS engines also ensure fuel and spark optimization throughout the engines' operating range. Finally, OPS engines offer full system corrosion protection and utilize environmentally friendly coolant.
Specifications:
The MV8 5.7L sets a new standard for recreational marine performance. Durable, reliable and efficient, the 5.7L is designed to keep your mind off troubleshooting and focused on enjoying your day on the water. The 5.7L has also been certified for tournament use by the American Water Ski Association.
The Ilmor MV8 Ocean Performance Series (OPS) engines are designed for salt-water use or other closed cooled applications. Available in all three displacement variants, OPS engines provide superior temperature control compared to an open cooled system and enhance catalyst performance through temperature control. The OPS engines also ensure fuel and spark optimization throughout the engines' operating range. Finally, OPS engines offer full system corrosion protection and utilize environmentally friendly coolant.
Specifications:
- Displacement: 5.7L
- Power Rating: 239 kW @ 5000 RPM (320 HP)
- Peak Torque: 365 ft-lbs @ 4200 RPM
MV8 6.0L and 6.0L OPS
DESCRIPTIONS:
The MV8 6.0L takes your on-water experience to the next level, exclusively featuring variable valve timing for extra performance.The dual-equal hydraulic cam phaser that adjusts camshaft timing at same rate for intake and exhaust valves; advancing cam timing for low end torque and retarding cam timing for high RPMhorsepower. Like the 5.7L, the 6.0L has been certified for tournament use by the American Water Ski Association.
The Ilmor MV8 Ocean Performance Series (OPS) engines are designed for salt-water use or other closed cooled applications. Available in all three displacement variants, OPS engines provide superior temperature control compared to an open cooled system and enhance catalyst performance through temperature control. The OPS engines also ensure fuel and spark optimization throughout the engines' operating range. Finally, OPS engines offer full system corrosion protection and utilize environmentally friendly coolant.
Specifications:
The MV8 6.0L takes your on-water experience to the next level, exclusively featuring variable valve timing for extra performance.The dual-equal hydraulic cam phaser that adjusts camshaft timing at same rate for intake and exhaust valves; advancing cam timing for low end torque and retarding cam timing for high RPMhorsepower. Like the 5.7L, the 6.0L has been certified for tournament use by the American Water Ski Association.
The Ilmor MV8 Ocean Performance Series (OPS) engines are designed for salt-water use or other closed cooled applications. Available in all three displacement variants, OPS engines provide superior temperature control compared to an open cooled system and enhance catalyst performance through temperature control. The OPS engines also ensure fuel and spark optimization throughout the engines' operating range. Finally, OPS engines offer full system corrosion protection and utilize environmentally friendly coolant.
Specifications:
- Displacement: 5.98L
- Power Rating: 283 kW @ 5200 RPM (380 HP)
- Peak Torque: 411 ft-lbs @ 4400 RPM
MV8 6.2L and 6.2L OPS
DESCRIPTIONS:
The lightweight aluminum 6.2L offers added performance for those looking for a little more power on the water, as well as the sophistication and technological know-how for high output marine applications.
The Ilmor MV8 Ocean Performance Series (OPS) engines are designed for salt-water use or other closed cooled applications. Available in all three displacement variants, OPS engines provide superior temperature control compared to an open cooled system and enhance catalyst performance through temperature control. The OPS engines also ensure fuel and spark optimization throughout the engines' operating range. Finally, OPS engines offer full system corrosion protection and utilize environmentally friendly coolant.
Specifications:
Displacement: 6.2L
Power Rating: 321 kW @ 5400 RPM (430 HP)
Peak Torque: 445 ft-lbs @ 4600 RPM
The lightweight aluminum 6.2L offers added performance for those looking for a little more power on the water, as well as the sophistication and technological know-how for high output marine applications.
The Ilmor MV8 Ocean Performance Series (OPS) engines are designed for salt-water use or other closed cooled applications. Available in all three displacement variants, OPS engines provide superior temperature control compared to an open cooled system and enhance catalyst performance through temperature control. The OPS engines also ensure fuel and spark optimization throughout the engines' operating range. Finally, OPS engines offer full system corrosion protection and utilize environmentally friendly coolant.
Specifications:
Displacement: 6.2L
Power Rating: 321 kW @ 5400 RPM (430 HP)
Peak Torque: 445 ft-lbs @ 4600 RPM
High Performance Engines
MV8 570
DESCRIPTIONS:
Ilmor's naturally aspirated, high-performance 570 hp engine is hand-built in our race engine shop and is based around GM's Performance Parts modern LS architecture cylinder block. All of the internal components are Ilmor-designed and are manufactured using higher strength materials, such as forged steel and forged aluminum, for long-term durability. The MV8 570 also utilizes sophisticated engine technologies like variable valve timing for overall enhanced performance, providing increased lower end torque and high RPM horsepower. The result is a fuel-efficient, compact and lightweight engine, in a beautifully dressed package.
Specifications:
Optional Upgrades:
Ilmor's naturally aspirated, high-performance 570 hp engine is hand-built in our race engine shop and is based around GM's Performance Parts modern LS architecture cylinder block. All of the internal components are Ilmor-designed and are manufactured using higher strength materials, such as forged steel and forged aluminum, for long-term durability. The MV8 570 also utilizes sophisticated engine technologies like variable valve timing for overall enhanced performance, providing increased lower end torque and high RPM horsepower. The result is a fuel-efficient, compact and lightweight engine, in a beautifully dressed package.
Specifications:
- Maximum Power: 570 HP @ 6000 RPM (419 kW @ 6000 RPM)
- Peak Torque: 564 ft-lbs @ 4400 RPM (765 Nm @ 4400 RPM)
- Full Throttle RPM Range: 5500-6000 RPM, 6100 RPM Limit
- Engine Capacity: 454 cubic inches (7.4 liters)
- Bore and Stroke: 4.185"/4.125"
- Compression Ratio: 10.7:1
- Engine Configuration: 90° V-8
- Block and Head Materials: Cast Iron Block; Aluminum Heads
- Crank and Connecting Rods: Forged Steel
- Pistons: Forged Alloy
- Alternator: 95 Amps
- Engine Controller: 4th Gen. E-Ctontrols
- Emissions Standard: California ARB 3-Star Ultra Low Emissions, EPA and EU RCD (CE) Certified
- Fuel Type: Unleaded 87-93 Octane
- Stern Drive: Teague Platinum / IMCO SCX/SC
- Engine Weight (with fluids): 830 lbs (376 kg)
- Intake Manifolds: Cast Aluminum
- Engine Color: Ilmor Red
- Engine Mount: Plug-in bellhousing, cast feet set-up, other standard mounts available.
Optional Upgrades:
- 570 X Dress Upgrade: Sport Tube Exhaust, Polished Components, Billet Pulleys and Caps, Custom Engine Covers
- Custom Engine Colors: Platinum, LimeTime Green, Tangelo, Violette, TrueBlue and other custom colors